|
|
Center Caps that MIGHT Fit Aftermarket Rims
These are some of our Replica Center Caps which are designed to replace Center caps for original equipment wheels. We talk to many people that are quite desperate to find something to fill the center holes in their fancy aftermarket wheels. Thus we are making this information available so you MIGHT be able to make something work, That was not designed for your specific wheels.
It will take careful measuring of the diameter of the center cap hole, and the depth of the ridge where the center cap clip indent grabs.
Some customers have broken or cut off the clips or tabs that did not work and then glued them in with silicone glue.
You may be able to figure out whether one of these may work on yours.
We DO NOT guarantee fitting, so measure carefully, as shown in the diagrams lower down on this page.
AutoAmenity Center Cap Measuring Service, see Details in Green Box below.
Good Luck, and Call us with any questions!
![]() Round Chrome Center Caps
|
Round Chrome Center Caps2-1/8" diameter Chrome Center Caps, Face of Cap is Flat Click for Model C550016-316 Details & Order 2-1/8" diameter Chrome Center Caps, Face of Cap is slightly Curved Click for Model C550214 Details & Order 2-1/4" diameter Chrome Center Caps, Face of Cap is slightly Curved Click for Model C550157 Details & Order 2-1/4" diameter Chrome Center Caps, Face of Cap is slightly Curved Click for Model C550124 Details & Order 2-1/4" diameter Chrome Center Caps, Face of Center Cap is domed Click for Model C550276 Details & Order 2-11/32" diameter Chrome Center Caps, Face of Cap is Flat Click for Model C550177 Details & Order 2-7/16" diameter Chrome Center Caps, Face of Center Cap is Flat Click for Model C550230-330 Details & Order 2-1/2" diameter Chrome Center Caps, Face of Cap is slightly Curved Click for Model C550091-391 Details & Order 2-1/2" diameter Chrome Center Caps, Face of Cap is slightly curved Click for Model C550127 Details & Order 2-1/2" diameter Chrome Center Cap, Face of Cap is flat Click for Model C550059 Details & Order 2-9/16" diameter Chrome Center Caps, Face of Center Cap is Flat Click for Model C550223 Details & Order 2-5/8" diameter Chrome Center Caps, Face of Cap is domed Model C550268 Details & Order 2-5/8" diameter Chrome Center Caps, Face of Cap is Flat Click for Model C550227 Details & Order 2-3/4" diameter Chrome Center Caps, Face of Cap is Flat Click for Model C550064 Details & Order 2-31/32" dia Chrome Center Caps, Face of Cap slightly domed Click for Model C550102 Details & Order 3" diameter Chrome Center Caps, Face of Cap is Flat Click for Model C550073 Details & Order 3-1/8" diameter Chrome Center Caps, Face of Cap is domed Click for Model C550262 Details & Order 3-9/32" diameter Chrome Center Caps, Face of Cap is domed Click for Model C550249 Details & Order 3-3/8" diameter Center Cap, Face of Center Cap is Flat Click for Model C550292 Details & Order 6-7/16" diameter Chrome Center Caps, Face of Cap is domed Click for Model C550119 Details & Order 6-7/16" diameter Chrome Center Caps, Face of Cap is slightly Curved Click for Model C550038 Details & Order 6-9/16" diameter Chrome Center Caps, Face of Cap is domed Click for Model C550065 Details & Order 6-23/32" diameter Chrome Center Caps, Face of Center Cap is domed Click for Model C550028 Details & Order 6-13/16" diameter Chrome Center Caps, Face of Center Cap is domed Click for Model C550004 Details & Order 6-13/16" diameter Chrome Center Caps, Face of Cap is slightly Curved Click for Model C550010 Details & Order 7-1/16" diameter Chrome Center Caps, Face of Cap is domed Click for Model C550014c Details & Order 7-11/32" diameter Chrome Center Caps, Face of Cap is domed Click for Model C550082 Details & Order 7-3/4" diameter Chrome Center Caps, Face of Cap is domed Click for Model C550074 Details & Order |
How we measure the various aspects of Center Caps:![]() Some Center Caps are more complicated than others![]() |
If you are not sure how to measure accurately with a ruler, These diagrams should help.Measuring conventions say that if a measurement is shy of a mark, it is rounded up to the next mark on the ruler. ![]() ![]() To minimize the chance for error, We measure with a dial caliper ![]() |
Note: Unlike Hubcaps, which are interchangeable and fit any standard
wheel, Center Caps are specific to make, model, and wheel of specific vehicles.
They all have different mounting systems, and they are NOT interchangeable.
There are no "Universal Fit" center caps. We do not carry any Center Caps
for aftermarket wheels.
Since our Replica Center Caps are copies, they do not show the OEM logo.
Logos are the legal trademark of the manufacturer, as such it would be Trademark
infringement to include them on Replica Center Caps.
You can buy a whole set of new replica Center Caps for less
than the cost of ONE replacement OEM Center Cap.
Call for prices on singles or pairs. Our center caps are
made of durable, thick, high-impact ABS polymer, specially engineered to hold up
under the heat generated by your brakes and wheels. They give your vehicle a
sharp OEM appearance for many years.
Center Caps are small hubcaps that cover the wheel center and lug nuts. Older
hemispherical center caps models were known as dog dish or moon caps. Replace
your lost or damaged center caps with our Replicas that look just like OEM
originals. These center caps are easy to install, and have the same look and fit
as your car’s original center caps. On the road, no one will notice the
difference.
Many auto dealers, mechanics, and enthusiasts across the USA certify to the
quality of AutoAmenity products and services. Our competent advisors are ready
to assist you in choosing the best style and quality Center Caps for your
vehicle.









