|> Nissan Sentra > Model 470 Nissan Sentra bolt-on Hubcaps|
Nissan Sentra Bolt-On Under-Lug Hubcaps / Wheel Covers
This pic shows Chrome, you can "see your face" in it
Nissan Sentra Specific-Fit Under-Lug Chrome Hubcaps
This pic shows standard silver
Nissan Sentra Specific-Fit Under-Lug Silver Hubcaps
These Under-Lug Hubcaps are exact replacements for Nissan Sentra hubcaps
that look the same. They fit 12+up Sentra but not earlier years.
Remove your OEM silver hubcap and bolt the 470 Hubcaps on under 3 lug nuts.Price includes set of 4 new Hubcaps
with Free Shipping to the 48 contiguous states.
For shipping outside the 48 states, please email.
Be sure to check and confirm your rim size before ordering.
Properly Tightening Lug Nuts is VERY important!!
Be Sure to Properly Torque your Lug nuts every time you remove them, when changing or rotating tires, or when installing bolt-on hubcaps. Proper installation requires that the wheel lug torque be set to the recommended specification for your vehicle. Torque values can be found in your vehicle's owner's manual, or obtain them from your vehicle dealer or service provider. As a general rule of thumb, most auto lugs should be tightened to at least 75 to 90 foot-pounds. It is best to tighten the lug nuts in a pattern of opposites as shown in the diagrams below. First tighten all the lugs to about 75%, then repeat the pattern to snug in to full torque.
|Need More Chrome?
Nissan Sentra Chrome Door Handle and Mirror Covers
Nissan Sentra Chrome Grill Inserts
If you can't find a style you like on this page, check out our
Nissan Replicas page
Dear Phil: The (419c-17) chrome hubcaps arrived today. On inspection, the caps
are perfect and should look beautiful on my brother-in-law's Chrysler 300C.
I again want to complement you on your responsive, quick, and impeccable
service. If you ever need an endorsement or recommendation concerning your
service posture, please feel free to call on me. Thanks again, and please
accept my wishes for a Happy Holiday Season and a Prosperous New Year. Larry
J, St. Augustine FL
Hi Phil: I did not get a chance to put the (925s-14) hubcaps on until today. They are every bit as good as the factory originals, and I installed all 4 simply in less than a minute. They look great, just like the factory ones. Jeremy N, Seal Beach, CA
Thank you for your quick response in sending the order to me. I was pleasantly surprised when the FedEx guy delivered the package on Friday. The (8813s) hubcaps are first quality in my opinion and I will definitely use your company again if it becomes necessary. Thank you! Rhonda F, Richmond VA
Hi Phil: Thank you getting back to me regarding this issue. Due to your excellent customer service (staying in touch and various offers to accommodate the customer's need for resolution), I WILL recommend your website to anyone who may be in the market for wheel covers, etc. In addition, I will also keep you in mind in case I ever need replacements or would like to change the look of my car sometime in the future. Thanks again for your prompt service and hope you have a good day! (944c-15 hubcaps) Best Regards, David C, Taunton MA
Note: Since Replica Wheel covers are copies, they do not show the
manufacturer’s logo. Logos are the legal trademark of the manufacturer, as such
it would be Trademark infringement to include them on Replica hubcaps.
Hubcaps Installation: Proper installation is easy and should not
require significant effort or force. Replica Hubcaps use a spring steel
retention ring pushing plastic or metal clips out against the steel wheel, to
hold it in place.
Locate the Hubcap to its proper position, align the hubcap notch with the valve stem. Hold the hubcap parallel to the rim all the way around and apply even pressure with both hands so the hubcap is not tilted away from the rim at any point. Increase the pressure evenly, side to side, top to bottom, and the retention clips will begin to slide into the rim. Try not to let the hubcap get too much away from parallel to the wheel as you ease it into place. You may need to gently punch it in with the heel of your fist. A rubber hammer should not be necessary. Proper installation results in the outer edge of the hubcap fitting firmly against the steel wheel all the way around. If it does not seat all around, do not drive with it. This is a sign of interference by tall lug nuts, hub, or an unusual wheel. The hubcap should not able to be pulled off using only your two bare hands. If you can pull it without tools, check our tips to Tighten Loose Hubcaps.
Many auto dealers, mechanics, and enthusiasts across the USA certify to the quality of AutoAmenity products and services. Our competent advisors are ready to assist you in choosing the best style and quality hubcaps for your vehicle. We carry Replica and Custom hubcap designs to suit any taste, make, or model of car. You can choose hubcaps to make your car look as natural or as flashy as you like.
Our hubcaps are made of durable ABS plastic that will give you years of good looks without the denting or rusting that steel hubcaps of the past were prone to. Each hubcap presses easily onto your standard steel wheel. To determine the right size hubcap for your wheels, read it off the tire.