|> Dodge Wheelskins > PR-7298c 17 inch Dodge Durango Wheelskins|
PR-7298c Dodge Durango Chrome Wheelskins Hubcaps
Please read this entire page before ordering
Model PR-7298c 17 inch
Sorry, This Item has been Discontinued, None RemainDodge Durango Chrome Wheelskins Hubcaps
Fit 04-09 Dodge Durango
Hollander Hubcap Replacement # 8019
Price includes set of 4 new Dodge Durango Push-on Hubcaps
with Free Shipping to the 48 contiguous states.
For shipping outside the 48 states, please email.
This Item replaces the Dodge Silver Hubcap shown below.
|I received the (426-C-16 chrome) hubs Friday as promised. I put them on
Saturday morning and I am very impressed. It gives my Grand Marquis an
updated look compared to the factory covers. Very easy to install and seems
like a tight fit. Andrew A, Niceville, FL
I recently ordered a set of (426s-16) hubcaps from you folks. They fit great, look just fine and filled the gap until the summer rims go back on. I found you folks with a simple Google search "wheel covers". Hope that helps you grow the business. Cal D, Ludington MI
I just got my (188s-16) wheelcovers and snapped them on my snow treads in less than 2 minutes - what a breeze and they look great (and I am female!). Thanks for your help! I just wish I would have contacted you before I spent 2 hours running from Auto Zone to the Tire Store and to Walmart and found nothing. Thank you again!
Renee T Canandaigua NY
Hi Phil: Thank you getting back to me regarding this issue. Due to your excellent customer service (staying in touch and various offers to accommodate the customer's need for resolution), I WILL recommend your website to anyone who may be in the market for wheel covers, etc. In addition, I will also keep you in mind in case I ever need replacements or would like to change the look of my car sometime in the future. Thanks again for your prompt service and hope you have a good day! (944c-15 hubcaps) Best Regards, David C, Taunton MA
Note: Since Replica Wheel covers are copies, they do not show the
manufacturer’s logo. Logos are the legal trademark of the manufacturer, as such
it would be Trademark infringement to include them on Replica hubcaps.
Hubcaps Installation: Proper installation is easy and should not
require significant effort or force. Replica Hubcaps use a spring steel
retention ring pushing plastic or metal clips out against the steel wheel, to
hold it in place.
Locate the Hubcap to its proper position, align the hubcap notch with the valve stem. Hold the hubcap parallel to the rim all the way around and apply even pressure with both hands so the hubcap is not tilted away from the rim at any point. Increase the pressure evenly, side to side, top to bottom, and the retention clips will begin to slide into the rim. Try not to let the hubcap get too much away from parallel to the wheel as you ease it into place. You may need to gently punch it in with the heel of your fist. A rubber hammer should not be necessary. Proper installation results in the outer edge of the hubcap fitting firmly against the steel wheel all the way around. If it does not seat all around, do not drive with it. This is a sign of interference by tall lug nuts, hub, or an unusual wheel. The hubcap should not able to be pulled off using only your two bare hands. If you can pull it without tools, check our tips to Tighten Loose Hubcaps.
Many auto dealers, mechanics, and enthusiasts across the USA certify to the quality of AutoAmenity products and services. Our competent advisors are ready to assist you in choosing the best style and quality hubcaps for your vehicle. We carry Replica and Custom hubcap designs to suit any taste, make, or model of car. You can choose hubcaps to make your car look as natural or as flashy as you like.
Our hubcaps are made of durable ABS plastic that will give you years of good looks without the denting or rusting that steel hubcaps of the past were prone to. Each hubcap presses easily onto your standard steel wheel. To determine the right size hubcap for your wheels, read it off the tire.