> Universal 5 Hubcaps
> 906 Hubcaps |
906s Universal Fit Silver Hubcaps / Wheel Covers
Model 906s-13" $54.50 per set of 4  Model 906s-14" $54.50 per set of 4 Model 906s-15" $57.50 per set of 4 Universal Fit Silver Hubcaps Price includes set of 4 new Universal Fit Push-on Hubcaps with Free Shipping to the 48 contiguous states. For shipping outside the 48 states, please email. |
|
I received them (906s-13 hubcaps), and they look great on the vehicle.
Excellent. Thank you. Patrick M, Richmond VA Thanks...for a good product (411s-15") at a fair price, and fast no nonsense delivery. I appreciate it. Tim C, Milwaukee WI Dear Phil: The (419c-17) chrome hubcaps arrived today. On inspection, the caps are perfect and should look beautiful on my brother-in-law's Chrysler 300C. I again want to complement you on your responsive, quick, and impeccable service. If you ever need an endorsement or recommendation concerning your service posture, please feel free to call on me. Thanks again, and please accept my wishes for a Happy Holiday Season and a Prosperous New Year. Larry J, St. Augustine FL Phil, Got the (422s-15) hubcaps and they look great on my daughter's VW Passat. I don't have any other cars that need hubcaps but if we ever buy a Subaru, you'll hear from me. Thanks again. Homer C, San Diego CA Hi Phil: I did not get a chance to put the (925s-14) hubcaps on until today. They are every bit as good as the factory originals, and I installed all 4 simply in less than a minute. They look great, just like the factory ones. Jeremy N, Seal Beach, CA |
Be sure to check and confirm your rim size before
ordering.
Do not measure rim size, read it off the tire.
If you are unsure, click
FAQ for help.
Visit our Hubcaps Installation pages for tips on making it easy, doing it right.
Note: Since Replica Wheel covers are copies, they do not show the
manufacturer’s logo. Logos are the legal trademark of the manufacturer, as such
it would be Trademark infringement to include them on Replica hubcaps.
Hubcaps Installation: Proper installation is easy and should not
require significant effort or force. Replica Hubcaps use a spring steel
retention ring pushing plastic or metal clips out against the steel wheel, to
hold it in place.
Locate the Hubcap to its proper position, align the hubcap notch with the valve
stem. Hold the hubcap parallel to the rim all the way around and apply even
pressure with both hands so the hubcap is not tilted away from the rim at any
point. Increase the pressure evenly, side to side, top to bottom, and the
retention clips will begin to slide into the rim. Try not to let the hubcap get
too much away from parallel to the wheel as you ease it into place. You may need
to gently punch it in with the heel of your fist. A rubber hammer should not be
necessary. Proper installation results in the outer edge of the hubcap fitting
firmly against the steel wheel all the way around. If it does not seat all
around, do not drive with it. This is a sign of interference by tall lug nuts,
hub, or an unusual wheel. The hubcap should not able to be pulled off using only
your two bare hands. If you can pull it without tools, check our tips to
Tighten Loose
Hubcaps.
Many auto dealers, mechanics, and enthusiasts across the USA certify to the
quality of AutoAmenity products and services. Our competent advisors are ready
to assist you in choosing the best style and quality hubcaps for your vehicle.
We carry Replica and Custom hubcap designs to suit any taste, make, or model of
car. You can choose hubcaps to make your car look as natural or as flashy as you
like.
Our hubcaps are made of durable ABS plastic that will give you years of good
looks without the denting or rusting that steel hubcaps of the past were prone
to. Each hubcap presses easily onto your standard steel wheel. To
determine the right size hubcap
for your wheels, read it off the tire.
Secure Transactions