> Motorhome RV Chrome or Stainless Hubcaps

Universal Fit Motor Home Hubcaps

Chrome ABS Plastic or Polished Stainless RV Wheel covers


Our Motor Home Wheel covers are ready for a fast and easy push-on installation. These RV Hubcaps are made of either polished T304 Stainless Steel or triple-chrome plated ABS plastic with metal retaining clips for a better fit and superior retention.

Fronts and Rears are the same, bulge convex outward

If you prefer the Dually Style (fronts bulge out and rears bow in) go to our Dual Wheel Simulators

Chrome ABS Plastic Motorhome RV Hubcaps

RV Motor Home Stainless or Chrome Hubcaps Wheel CoversRV Motor Home Stainless or Chrome Hubcaps Wheel Covers

Please Read all the fine print details before ordering. Stainless is below.

Model AL160P  chrome ABS plastic fits  16"  wheel   $104.50     per set of 4  

Model AL No longer available as partial sets

Model AL165P chrome ABS plastic fits 16.5" wheel   $109.50    per set of 4  

 

Universal Fit Chrome RV Motorhome Hubcaps,
Use standard steel retention ring hubcap mounting system with metal clips
These ABS hubcaps fit most 8-lug RV Motor home wheels since 1979.
If your studs protrude more than 1/2" past your lug nuts, Choose the Stainless, which have more room. See pic below

Some Customers have reported that newer wheels may have TPMS modules with steel valve stems that project at different angles and thus may require filing a notch to accommodate the valve stem.

Not recommended for Sprinter or Chevy 3500 wheels after 2001: These Will Fit, but these wheels are thinner
more flexile steel and tend to throw push-on hubcaps, for these we recommend Bolt-on Simulators

Model AL Does NOT Fit 6 or 10-lug wheels, Alloy wheels, nor Sprinter Dual Wheels.

If you have 6 or 10-lug wheels or want Bolt-Ons See our Dual Wheel Simulators

If you have Sprinter Dual Wheels, Click for Other Options for Sprinter Dual Wheels

Polished  Stainless Steel Motor Home RV Hubcaps

T304 Alloy Stainless is Marine Grade, 18% Chrome and 11% Nickel,
RV Motor Home Stainless or Chrome Hubcaps Wheel CoversOblique view of Stainless RV Motor Home Chrome Hubcaps Wheel Covers showing 360 Retention tabsRV Motor Home Stainless or Chrome Hubcaps Wheel Covers

Please Read all the fine print details before ordering.

Model QC160A  Polished Stainless  fits  16"  wheel   $129.50    per set of 4 

Model QC160AS    PAIR  Stainless  fits 16"  wheel    $89.50 per Axle Set (2)

 

Model AL165SS Polished Stainless fits 16.5" wheel  $159.50   per set of 4

Model AL No longer available as partial sets


Universal Fit Stainless RV Motorhome Hubcaps,
Use "360 Degree Retention" mounting system with metal tabs all around
These hubcaps fit 8-lug dual RV Motorhome wheels since 1979

Some Customers have reported that newer wheels may have TPMS modules with steel valve stems that project at different angles and thus may require filing a notch to accommodate the valve stem.

Not recommended for Chevy 3500 wheels since 2001, These will Fit, but the Chevy wheels are thinner
more flexile steel and tend to throw push-on hubcaps, for these we recommend GDG01 Bolt-on Simulators

When installing these on Sprinter Single wheels, Be Sure to bend out the mounting clips so that you cannot remove them with your bare hands.

Model AL/QC Do NOT Fit 6 or 10-lug Dual wheels, Alloy wheels, nor Sprinter Dual Wheels.

If you have 6 or 10-lug wheels, see our Dual Wheel Simulators

If you have Sprinter Dual Wheels, Click for Other Options for Sprinter Dual Wheels

Prices include set of 4 new Motorhome Push-on Hubcaps
with Free Shipping* to the 48 contiguous states.
For shipping outside the 48 states, please email.

The picture below compares the ABS Plastic to the Stainless Motorhome Hubcaps.
Note the Stainless model (right) has a slightly taller profile, resulting in the
nut caps extending about one inch further out from the steel wheel.

RV Motor Home Stainless or Chrome Hubcaps Wheel Covers
Be sure to check and confirm your rim size before ordering.
Do not measure rim size, read it off the tire.
If you are unsure, click FAQ for help.

 
Motorhome RV Hubcaps installed on a Dodge Sprinter Van Phil - I appreciate the advice and guidance on the Motor Home RV hubcaps for my Sprinter - Great service and a great product. Mike O, Flat Rock, NC
(Sprinter with 16 inch single wheels)
Motorhome RV Hubcaps installed on a Winnebago RV Phil - Thanks for the advice on the Stainless Motor Home Hubcaps. Irene K, Sanborn NY
Hello: The (Chrome ABS) RV hubcaps arrived Thursday 3-18-2011. They appear to be of good quality. Mounting them on the rear rims was easy, but the front was more of a challenge. The lug nuts and bolts protrude almost three inches and these must fit perfectly into the hollow 'lug nuts' of the hubcaps. At first glance it looked like they would not fit, but after some careful measurements and 'gentle' persuasion they went on. You might mention in your web page about how the hub caps must be fitted on front wheels. Thanks for the quality product and prompt delivery. Bill B, Mentone, SoCal [Ed. Note: Lug and Stud protrusion varies quite a bit. The ABS version has less room for long studs than the Stainless Version, as shown in the profile comparison above.]

The (AL160SS) wheel covers came as ordered and on the date predicted. Great Job! Thanks Phil Jim L, Livermore CA

Thank you for your quick response in sending the order to me. I was pleasantly surprised when the FedEx guy delivered the package on Friday. The (8813s) hubcaps are first quality in my opinion and I will definitely use your company again if it becomes necessary. Thank you! Rhonda F, Richmond VA

Hi Phil: I did not get a chance to put the (925s-14) hubcaps on until today. They are every bit as good as the factory originals, and I installed all 4 simply in less than a minute. They look great, just like the factory ones. Jeremy N, Seal Beach, CA

Hi Phil: Thank you getting back to me regarding this issue.  Due to your excellent customer service (staying in touch and various offers to accommodate the customer's need for resolution), I WILL recommend your website to anyone who may be in the market for wheel covers, etc. In addition, I will also keep you in mind in case I ever need replacements or would like to change the look of my car sometime in the future. Thanks again for your prompt service and hope you have a good day! (944c-15 hubcaps) Best Regards,  David C, Taunton MA

Be sure to check and confirm your rim size before ordering.
Do not measure rim size, read it off the tire.
If you are unsure, click FAQ for help.

Visit our Hubcaps Installation pages for tips on making it easy, doing it right.

Note: Since Replica Wheel covers are copies, they do not show the manufacturer’s logo. Logos are the legal trademark of the manufacturer, as such it would be Trademark infringement to include them on Replica hubcaps. Hubcaps Installation: Proper installation is easy and should not require significant effort or force. Replica Hubcaps use a spring steel retention ring pushing plastic or metal clips out against the steel wheel, to hold it in place.

Locate the Hubcap to its proper position, align the hubcap notch with the valve stem. Hold the hubcap parallel to the rim all the way around and apply even pressure with both hands so the hubcap is not tilted away from the rim at any point. Increase the pressure evenly, side to side, top to bottom, and the retention clips will begin to slide into the rim. Try not to let the hubcap get too much away from parallel to the wheel as you ease it into place. You may need to gently punch it in with the heel of your fist. A rubber hammer should not be necessary. Proper installation results in the outer edge of the hubcap fitting firmly against the steel wheel all the way around. If it does not seat all around, do not drive with it. This is a sign of interference by tall lug nuts, hub, or an unusual wheel. The hubcap should not able to be pulled off using only your two bare hands. If you can pull it without tools, check our tips to Tighten Loose Hubcaps.

Many auto dealers, mechanics, and enthusiasts across the USA certify to the quality of AutoAmenity products and services. Our competent advisors are ready to assist you in choosing the best style and quality hubcaps for your vehicle. We carry Replica and Custom hubcap designs to suit any taste, make, or model of car. You can choose hubcaps to make your car look as natural or as flashy as you like.

Our hubcaps are made of durable ABS plastic that will give you years of good looks without the denting or rusting that steel hubcaps of the past were prone to. Each hubcap presses easily onto your standard steel wheel. To determine the right size hubcap for your wheels, read it off the tire.