> Ford Mustang Chrome Trim
> Ford Mustang Chrome Door handle Covers |
Ford Mustang Chrome ABS Door handle Covers
 Ford Mustang Chrome ABS Door Handle Kit CCIDH-68125B $65.95  Fits 05-08 Ford Mustang 2 Door Kit Easy Peel-and-Stick installation. Price includes set of Chrome ABS Door handle Covers with Free Shipping* to the 48 contiguous states. For shipping outside the 48 states, please email. Factory Door handles look like this  |
Need more Chrome? Check out our Ford Mustang Chrome Grill Inserts  Ford Mustang Chrome Wheelskins  |
Easy Peel-and-Stick installation.
Nothing catches eyes like the flash of chrome. Dress up your
door and tailgate handles, Door handles, and add chrome trim to your tail
lights. Restyling Ideas™ and Florida Fender Trim chrome trim products enhance
the unique look of your vehicle. All are custom made for a perfect fit.
Installation is quick and easy. No cutting or drilling. Brilliant chrome finish
matches OEM chrome.
These high grade Triple-Chrome-Plated ABS products have been designed to
respect the original factory look while enhancing the stylish appearance of your
vehicle.
All Restyling Ideas™ products carry a limited lifetime warrantee.
Uses high quality heat and cold-resistant 3M tape adhesion. Will not fall off.
Simple Installation: Clean the surface with alcohol, peel the
film off the pre-applied tape, position, and press on.
Chrome Trim Installation Detail:
Our Chrome Trim Items
utilize
3M Automotive Attachment Tape, and are best installed at
temperatures warmer than 65 degrees.
This process is not difficult, but it does require your full attention.
We recommend dry-fitting ALL of your chrome trim pieces to
ALL of their specific locations BEFORE peeling
ANY of the wax papers off the tape. Make sure all the pieces are
correct, i.e., you have received both right and left sides, with and without
keyholes or keypads, etc, and that all are undamaged. Chrome pieces should fit
perfectly. This is also good practice lining up each piece and guiding it into
place. Repeat this practice positioning with each piece a couple of times,
visualizing how you will finally do it when the waxed strips are removed and the
tape is STICKY.
Prepare the vehicle bonding surface by cleaning it thoroughly with
alcohol and a clean white cotton rag.
This removes wax residues so the 3M Peel-and-stick adhesive can bond to
it securely. Avoid using colored cloth for this purpose, as the dyes in the
fabric may leave colored residue behind. We have found that the tape adheres
better to painted surfaces than plastic ones. This is due to the inherent
smoothness of the paint, where the plastic usually has a fine textured surface
that tends to hold onto wax residues. If you have the black plastic version of
door handles, Door handle covers, etc. on your vehicle, be sure to put some
extra effort into cleaning the plastic.
Peel off the wax papers, position, and carefully press into place.
After your Chrome Trim items have been fitted to the vehicle surface, rub each
piece firmly with a soft cloth to help ensure that it is seated securely. You
may want to come back a few hours later, or the next day, to give each piece of
chrome trim another pressure rub to ensure the best adhesion.
Allow the molding adhesive to set up for at least 24 hours before
washing your vehicle. Maximum adhesion is reached after 3-5 days in
temperatures above 70 degrees, longer if it is cooler. Once the adhesive has
fully bonded to a properly prepared surface, it is nearly impossible to remove
the item without damaging it. As an example, customers have reported backing out
of their garage and catching only the edge of a chrome Door handle cover on the
door opening, and breaking off the end of the chrome Door handle cover without
dislodging the rest of it.
3M Automotive Attachment Tape is a .045-inch thick, medium-density
white acrylic foam tape with high performance acrylic adhesives on both sides
and a red release liner.
3M Automotive Attachment Tape uses automotive OEM (Original
Equipment Manufacturer) approved acrylic foam core and adhesive technology. It
is characterized by high peel and shear adhesion, high internal strength, high
conformability and excellent plasticizer resistance. Typical applications would
include body side moldings, rocker panel trim, claddings, bumper trim and other
automotive trim components. Because it requires no drilling into automotive
painted surfaces,
3M Automotive Attachment Tape eliminates the concern for rust
development associated with the use of mechanical fasteners. The unique stress
relaxation properties of the tape's foam core allow it to expand and contract
with temperature changes. Stress forces of an application are dissipated
throughout the foam core, providing excellent long-term performance. The
viscoelastic properties incorporated into these tapes allow it to conform to
surface irregularities and gaps, providing a better fit by compensating for some
part-to-vehicle mismatch. The use of 3M acrylic foam tapes eliminates the
unsightly appearance of bolt, screw or rivet heads associated with mechanical
fasteners. Surfaces remain clean and smooth, contributing to styling and
aerodynamic design. The use of acrylic foam tape can eliminate steps in the
installation process, often requiring fewer parts and less labor time.
We have listed on this website all of the product items that our supplier
currently stocks, but more may be added at any time. If you do not see
what you need for your make/model/year, email us and we will see if or when they
may be available.
Secure Transactions