AutoAmenity Chrome Wheelskins Hubcaps Home > Ford HD Chrome Trim > Ford F250-F350 HD Chrome Door handle Covers

Ford Excursion and F250-F350 Super Duty

Chrome Door handle Covers

Ford F250/F350 Chrome Door Handles installed
Ford Excursion and Super Duty Chrome ABS Door Handle Kit

Please Read Installation Notes Below!! Call with Questions.

Note:

Some Ford HD Trucks may have a Keypad but NO Keyhole on the Drivers Side.

 

ALL of the Handle covers we have here DO HAVE the Keyhole on the Drivers Side.

Fits 1999 - 2013 Ford F250

Fits 1999 - 2013 Ford F350

Fits 2000 - 2013 Ford Excursion


CCIDH-68115A $44.95

(Alt FFTDH-11205)
2 Door Kit WITH Pass Key Hole

CCIDH-68115B $44.95

(Alt FFTDH-11205k, SESDH-113-2)
2 Door Kit NO Pass Key Hole

CCIDH-68116A $57.95

(Alt FFTDH-11206)
4 Door Kit WITH Pass Key Hole

CCIDH-68116B $54.95

(Alt FFTDH-11206k, SESDH-113-4)
4 Door Kit NO Pass Key Hole

Price includes set of Chrome ABS Ford Door handle Covers
with Free Shipping* to the 48 contiguous states.
For shipping outside the 48 states, please email.

Installation Note:

**Small changes in position may eliminate binding between the pull and base pieces.**

As you can see in our pictures,

there is limited clearance between the pull piece and the base piece along the hinge side.
Take extra care while dry-fitting these items, BEFORE Sticking them.
Carefully check to see which install direction of the pull-piece will work best; since the pull piece is rectangular, it can be mounted one way up or the other way up; it is usually best to mount it with the thicker edge toward the wide rear finger space.

Also, the base piece may need to shift forward slightly to ensure clearance.


OEM Ford Black Plastic Handles Before chrome
Ford F250/F350 Chrome Door Handles not installed

Easy Peel-and-Stick installation.
 
Need More Chrome?
Check out our
Chrome Wheelskins for F250-350 
IMP-59X Impostor Ford F150 Truck Chrome Wheelskins Hubcaps and Wheel CoversIMP-74X Impostor Ford F250 F350 Truck Chrome Wheelskins Hubcaps and Wheel Covers

Easy Peel-and-Stick installation.

Nothing catches eyes like the flash of chrome. Dress up your door and tailgate handles, Door handles, and add chrome trim to your tail lights. Restyling Ideas™ and Florida Fender Trim chrome trim products enhance the unique look of your vehicle. All are custom made for a perfect fit. Installation is quick and easy. No cutting or drilling. Brilliant chrome finish matches OEM chrome.
These high grade Triple-Chrome-Plated ABS  products have been designed to respect the original factory look while enhancing the stylish appearance of your vehicle.
All Restyling Ideas™ products carry a limited lifetime warrantee.
Uses high quality heat and cold-resistant 3M tape adhesion. Will not fall off.

Simple Installation: Clean the surface with alcohol, peel the film off the pre-applied tape, position, and press on.

Chrome Trim Accessory Installation Detail:

Our Chrome Trim Items utilize 3M Automotive Attachment Tape, and are best installed at temperatures warmer than 65 degrees.


This process is not difficult, but it does require your full attention. Best accomplished on a warm dry day with no child distractions.

We recommend Dry-Fitting ALL of your chrome trim accessory pieces to ALL of their specific locations BEFORE Peeling ANY of the wax papers off the tape. Make sure all the pieces are correct, i.e, you have received both right and left sides, with and without keyholes or keypads, etc, and that all are undamaged. Chrome pieces should fit PERFECTLY. There should be no rocking (curvature mismatch) or space underneath. If any pieces are not perfect, or you have rocking from mis-matched curves, CALL US!
Note that once the wax paper is peeled, we cannot give credit for return.

Dry Fitting is also good practice lining up each piece and guiding it into place. Repeat this practice positioning with each piece a couple of times, visualizing how you will finally do it when the waxed strips are removed and the tape is STICKY.


Prepare the vehicle bonding surface by cleaning it thoroughly with regular isopropyl rubbing alcohol and a clean lint-free white cotton rag or clean disposable toweling. Do not use shop rags which may have dirt or oily residues. For more professional results, use 3M brand Prep Solvent 70 or similar products available at many auto stores.

 

THOROUGH CLEANING removes oily or waxy residues so the 3M Peel-and-stick adhesive can bond securely. Avoid using colored cloth rags for this purpose, as dyes in the fabric may leave colored residue behind.

We do not recommend using packaged alcohol towelettes because they may contain antimicrobial agents such as Benzalkonium Chloride, skin lotion, conditioners, or other additives which could leave residues that may prevent proper adhesion of the 3M tape.

If you use packaged towelettes for one cleaning step, you should follow that by another cleaning with clean disposable toweling and alcohol or 3M cleaner. Do not re-use towels from one cleaning step to the next, since they may re-distribute residues you are trying to get rid of.

Some common automotive products, such as silicone-based waxes or surface conditioners such as Armor-All or Tire Shine. may be  more difficult to remove completely. If such products have been applied to the surface any time in the past, it may require 4 or more repeats of cleaning with new clean cloth and alcohol or 3M solvent to completely remove. If you have any doubt of cleanliness of the surface, test with a small piece of masking tape to different area’s that have been cleaned. (Use a new piece of masking tape for each area tested.)

If the masking tape peels off without much resistance, repeat cleaning steps until the masking tape sticks aggressively.

We have found that 3M tape adheres better to painted surfaces than plastic ones. This is due to the inherent smoothness of the paint, where the plastic usually has a fine textured surface that tends to hold onto wax residues and may need more thorough cleaning.



Peel off the wax papers, position, and carefully press into place.
After your Chrome Trim items have been fitted to the vehicle surface, rub each piece firmly with a soft cloth to help ensure that it is seated securely. You may want to come back a few hours later, or the next day, to give each piece of chrome trim another pressure rub to ensure the best adhesion.

Allow the molding adhesive to set up for at least 24 hours before washing your vehicle. Maximum adhesion is reached after 3-5 days in temperatures above 70 degrees, longer if it is cooler. Once the adhesive has fully bonded to a properly prepared surface, it is nearly impossible to remove the item without damaging it. As an example, customers have reported backing out of their garage and catching only the edge of a chrome Door handle cover on the door opening, and breaking off the end of the chrome Door handle cover without dislodging the rest of it.

3M Automotive Attachment Tape is a .045-inch thick, medium-density white acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner. 3M Automotive Attachment Tape uses automotive OEM (Original Equipment Manufacturer) approved acrylic foam core and adhesive technology. It is characterized by high peel and shear adhesion, high internal strength, high conformability and excellent plasticizer resistance. Typical applications would include body side moldings, rocker panel trim, claddings, bumper trim and other automotive trim components. Because it requires no drilling into automotive painted surfaces, 3M Automotive Attachment Tape eliminates the concern for rust development associated with the use of mechanical fasteners. The unique stress relaxation properties of the tape's foam core allow it to expand and contract with temperature changes. Stress forces of an application are dissipated throughout the foam core, providing excellent long-term performance. The viscoelastic properties incorporated into these tapes allow it to conform to surface irregularities and gaps, providing a better fit by compensating for some part-to-vehicle mismatch. The use of 3M acrylic foam tapes eliminates the unsightly appearance of bolt, screw or rivet heads associated with mechanical fasteners. Surfaces remain clean and smooth, contributing to styling and aerodynamic design. The use of acrylic foam tape can eliminate steps in the installation process, often requiring fewer parts and less labor time.

We have listed on this website all of the product items that our supplier currently stocks, but more may be added at any time.  If you do not see what you need for your make/model/year, email us and we will see if or when they may be available.