> Chevy Chrome Trim
> GMC Chrome Trim
> Chevy-GMC Chrome Door Handle Covers |
Chevy-GMC Chrome Door Handle Covers
| 2007 Chevrolet-GMC Chrome ABS Door Handle Covers Installed  |
| Chevy-GMC Chrome ABS Door Handle Cover Kit 2 Door Kit = 2 base pieces + 2 handle pieces CCIDH-68135B2 2 Door $49.95  (alt FFTDH-12205k) NO Passenger side Key Hole Fits 07-08 Chevy Avalanche, Silverado 1500-2500 HD Fits 07-08 Chevy Suburban, Tahoe Fits 07-08 GMC Sierra 1500-2500 HD, Yukon Denali 4 Door Kit = 4 base pieces + 4 handle pieces CCIDH-68135B 4 Door$89.95 (alt FFTDH-12206k) NO Passenger side Key Hole Fits 07-08 Cadillac Escalade Fits 07-08 Chevy Avalanche, Silverado 1500-2500 HD Fits 07-08 Chevy Suburban, Tahoe Fits 07-08 GMC Sierra 1500-2500 HD, Yukon Denali Prices include set of Chrome ABS Door Handle Covers with Free Shipping* to the 48 contiguous states. For shipping outside the 48 states, please email. Easy Peel-and-stick Installation Stock painted door handles, Before Chrome Covers  |
Transform your standard dull factory look with
attention-grabbing chrome from your grill to your tail lights. Make your
car, truck or SUV stand out in a crowd, or add just a touch of “bling” to
turn a few heads for a fraction of the cost of chromed metal replacements.
Our high grade triple-chrome-plated ABS Chrome trim accessories are
custom-engineered for a perfect fit, to dramatically enhance your plain,
pitted original plastic or painted accessories.
Installation is as simple as Clean, Peel, Position and Press. No
measuring, cutting or drilling needed.
Our chrome trim accessories have a lifetime warrantee against
defects and use high quality 3M automotive tape, so they will never fall
off, and weather the elements better than ‘real chrome.’ They will not
corrode, pit, or rust.
Simple Installation: Clean the surface with
alcohol, Peel the film off the pre-applied tape, Position, and press on.
Chrome Trim Accessory Installation Detail:
Our Chrome Trim Items utilize 3M Automotive Attachment
Tape,
and are best installed at temperatures warmer than 65 degrees.
This process is not difficult, but it does require your full
attention.
We recommend dry-fitting ALL of your chrome trim
accessory pieces to ALL of their specific locations
BEFORE
peeling ANY of the wax papers off the tape. Make
sure all the pieces are correct, i.e., you have received both right
and left sides, with and without keyholes or keypads, etc, and that
all are undamaged. Chrome pieces should fit perfectly. This is also
good practice lining up each piece and guiding it into place. Repeat
this practice positioning with each piece a couple of times,
visualizing how you will finally do it when the waxed strips are
removed and the tape is STICKY.
Prepare the vehicle bonding surface by cleaning it
thoroughly with alcohol and a clean white cotton rag. This
removes wax residues so the 3M Peel-and-stick adhesive can bond to
it securely. Avoid using colored cloth for this purpose, as the dyes
in the fabric may leave colored residue behind. We have found that
the tape adheres better to painted surfaces than plastic ones. This
is due to the inherent smoothness of the paint, where the plastic
usually has a fine textured surface that tends to hold onto wax
residues. If you have the black plastic version of door handles,
mirror covers, etc. on your vehicle, be sure to put some extra
effort into cleaning the plastic.
Peel off the wax papers, position, and carefully press into
place.
After your chrome trim accessory items have been fitted and pressed
to the vehicle surface, rub each piece firmly with a soft cloth to
help ensure that it is seated securely. You may want to come back a
few hours later, or the next day, to give each piece of chrome trim
another pressure rub to ensure the best adhesion.
Allow the molding adhesive to set up for at least 24 hours
before washing your vehicle. Maximum adhesion is reached
after 3-5 days in temperatures above 70 degrees, longer if it is
cooler. Once the adhesive has fully bonded to a properly prepared
surface, it is nearly impossible to remove the item without damaging
it. As an example, customers have reported backing out of their
garage and catching only the edge of a chrome mirror cover on the
door opening, and breaking off the end of the chrome mirror cover
without dislodging the rest of it.
3M Automotive Attachment Tape is a .045-inch thick,
medium-density white acrylic foam tape with high performance acrylic
adhesives on both sides and a red release liner. 3M
Automotive Attachment Tape
uses automotive OEM (Original Equipment Manufacturer) approved
acrylic foam core and adhesive technology. It is characterized by
high peel and shear adhesion, high internal strength, high
conformability and excellent plasticizer resistance. Typical
applications would include body side moldings, rocker panel trim,
claddings, bumper trim and other automotive trim components. Because
it requires no drilling into automotive painted surfaces, 3M
Automotive Attachment Tape eliminates the concern for rust
development associated with the use of mechanical fasteners. The
unique stress relaxation properties of the tape's foam core allow it
to expand and contract with temperature changes. Stress forces of an
application are dissipated throughout the foam core, providing
excellent long-term performance. The viscoelastic properties
incorporated into these tapes allow it to conform to surface
irregularities and gaps, providing a better fit by compensating for
some part-to-vehicle mismatch. The use of 3M acrylic foam tapes
eliminates the unsightly appearance of bolt, screw or rivet heads
associated with mechanical fasteners. Surfaces remain clean and
smooth, contributing to styling and aerodynamic design. The use of
acrylic foam tape can eliminate steps in the installation process,
often requiring fewer parts and less labor time.
We have listed on this website all of the product items that our
supplier currently stocks, but more may be added at any time.
If you do not see what you need for your make/model/year, email us
and we will see if or when they may be available.
Secure Transactions