> Chevy Trim
> GM Trim
> Chevy GMC C-K Pickup Chrome Tail Gate Covers |
Chevy GMC C-K Pickup Chrome Tail Gate Handle Covers
C & K Trucks Chrome ABS Tailgate Handle Covers  Chevy C-K Pickup Chrome ABS Tail Gate Handle Covers TGH-CCI-65208 $39.95  Fits 88-98 Chevy C-10 Pickup Trucks Fits 88-98 GMC C-10 Pickup Trucks |
| Includes one base piece + one handle piece Easy Peel-and-stick Installation Price includes set of Chrome ABS Tail Gate Handle Covers with Free Shipping to the 48 contiguous states. For shipping outside the 48 states, please email. |
Easy Peel-and-Stick installation.
Transform your standard dull factory look with
attention-grabbing chrome from your grill to your tail lights. Make your car,
truck or SUV stand out in a crowd, or add just a touch of “bling” to turn a few
heads for a fraction of the cost of chromed metal replacements.
Our high grade triple-chrome-plated ABS Chrome trim accessories are
custom-engineered for a perfect fit, to dramatically enhance your plain, pitted
original plastic or painted accessories.
Installation is as simple as Clean, Peel, Position and Press. No measuring,
cutting or drilling needed.
Our chrome trim accessories have a lifetime warrantee against defects and use
high quality 3M automotive tape, so they will never fall off, and weather the
elements better than ‘real chrome.’ They will not corrode, pit, or rust.
Simple Installation: Clean the surface with alcohol, Peel the
film off the pre-applied tape, Position, and press on.
Chrome Trim Accessory Installation Detail:
Our Chrome Trim Items utilize
3M Automotive Attachment Tape, and are best installed at
temperatures warmer than 65 degrees.
This process is not difficult, but it does require your full attention.
We recommend dry-fitting ALL of your chrome trim accessory
pieces to ALL of their specific locations BEFORE
peeling ANY of the wax papers off the tape. Make sure all the
pieces are correct, i.e., you have received both right and left sides, with and
without keyholes or keypads, etc, and that all are undamaged. Chrome pieces
should fit perfectly. This is also good practice lining up each piece and
guiding it into place. Repeat this practice positioning with each piece a couple
of times, visualizing how you will finally do it when the waxed strips are
removed and the tape is STICKY.
Prepare the vehicle bonding surface by cleaning it thoroughly with
alcohol and a clean white cotton rag.
This removes wax residues so the 3M Peel-and-stick adhesive can bond to
it securely. Avoid using colored cloth for this purpose, as the dyes in the
fabric may leave colored residue behind. We have found that the tape adheres
better to painted surfaces than plastic ones. This is due to the inherent
smoothness of the paint, where the plastic usually has a fine textured surface
that tends to hold onto wax residues. If you have the black plastic version of
door handles, mirror covers, etc. on your vehicle, be sure to put some extra
effort into cleaning the plastic.
Peel off the wax papers, position, and carefully press into place.
After your chrome trim accessory items have been fitted and pressed to the
vehicle surface, rub each piece firmly with a soft cloth to help ensure that it
is seated securely. You may want to come back a few hours later, or the next
day, to give each piece of chrome trim another pressure rub to ensure the best
adhesion.
Allow the molding adhesive to set up for at least 24 hours before
washing your vehicle. Maximum adhesion is reached after 3-5 days in
temperatures above 70 degrees, longer if it is cooler. Once the adhesive has
fully bonded to a properly prepared surface, it is nearly impossible to remove
the item without damaging it. As an example, customers have reported backing out
of their garage and catching only the edge of a chrome mirror cover on the door
opening, and breaking off the end of the chrome mirror cover without dislodging
the rest of it.
3M Automotive Attachment Tape is a .045-inch thick, medium-density
white acrylic foam tape with high performance acrylic adhesives on both sides
and a red release liner.
3M Automotive Attachment Tape uses automotive OEM (Original
Equipment Manufacturer) approved acrylic foam core and adhesive technology. It
is characterized by high peel and shear adhesion, high internal strength, high
conformability and excellent plasticizer resistance. Typical applications would
include body side moldings, rocker panel trim, claddings, bumper trim and other
automotive trim components. Because it requires no drilling into automotive
painted surfaces,
3M Automotive Attachment Tape eliminates the concern for rust
development associated with the use of mechanical fasteners. The unique stress
relaxation properties of the tape's foam core allow it to expand and contract
with temperature changes. Stress forces of an application are dissipated
throughout the foam core, providing excellent long-term performance. The
viscoelastic properties incorporated into these tapes allow it to conform to
surface irregularities and gaps, providing a better fit by compensating for some
part-to-vehicle mismatch. The use of 3M acrylic foam tapes eliminates the
unsightly appearance of bolt, screw or rivet heads associated with mechanical
fasteners. Surfaces remain clean and smooth, contributing to styling and
aerodynamic design. The use of acrylic foam tape can eliminate steps in the
installation process, often requiring fewer parts and less labor time.
We have listed on this website all of the product items that our supplier
currently stocks, but more may be added at any time. If you do not see
what you need for your make/model/year, email us and we will see if or when they
may be available.
Secure Transactions