AutoAmenity Home Click to see Shopping Cart
We Ship Worldwide.
Free Shipping to US 48 States
Questions?
Call 888-526-0273
Florida Business hours
AutoAmenity Chrome Wheelskins Hubcaps Home > Single Wheel Simulators > P-GQST60 Stainless 16 inch Single Wheel Simulators

P-GQST60 Stainless Steel Push-on Single Wheel 'Simulator' Hubcaps

Fit Standard 16 inch Steel Wheels

Front View of GQST60 Stainless Steel Push-on Single Single Wheel Truck Simulators Hubcap Liner Wheel coversAngled view of P GQST60 Stainless Steel Push-on Single Single Wheel Truck Simulators Hubcap Liner Wheel coversBack view of P GQST60 Stainless Steel Push-on Single Single Wheel Truck Simulators Hubcap Liner Wheel covers

               Front view                          Angled view,   and Back View shows 360 mounting tabs

**Please read this entire page before you make a purchase**

P-GQST60  Stainless Steel Single Wheel Simulator / Liner Hubcaps, Push-on Installation

**If your Hubs extend past a line across the outer edge of the wheel--Read the decision tree below.**

Model P-GQST60 Push-on $179.50 per Set of 4

 

Model P-GQST60AS Push-on $109.50 Axle Set (Pair)

 

Single P-GQST60 =Part # PGQS64SWL $69.50 Call to Order

Phoenix Logos CLPH275 are sold separately

All 4 center covers (PGQ60POC) are removable for trailer or 4x4 manual hubs

Fits 16" 6 or 8 lug Standard Steel Single Truck or Trailer** Wheels

Fit Chevy-GMC Trucks 2000 & earlier,  Vans 02 & earlier

Fits Dodge 01 & earlier

Fits Ford Truck Wheels if the hubs are within guidelines set out below.

If you have styled wheels, these will not work, you should look at our Wheelskins section

Prices include set of new Stainless Push-on Simulator Hubcaps
with Free Shipping to the 48 contiguous states.
For shipping outside the 48 states, please email.

** Fits car/truck wheels that look like these:
Older 1970s Steel WheelToyota Truck  Steel Wheel


**Fit most "White Spoke" (left) or
"Mod" (right) Trailer wheels that look like these:

6 Lug 16 inch White Spoke Trailer Wheel6 Lug 16 inch White Spoke Trailer Wheel
Wheels must have "Safety Hump"  marked with the red dot
Read more on Safety Hump page, or call with your questions.
Back view of hub Clearance for P GQST60 16 inch Stainless Steel Push-on Single Single Wheel Truck Simulators Hubcap Liner Wheel coversStraight Edge across the wheel to measure how close the center hub gets to P GQST60 16 inch covers
 
It is pretty rare for a hub to be too large to fit inside the P GQST60, but it does occur occasionally.

This picture attempts to show you the diameter and protrusion clearance available for Heavy-Duty Axle Hubs. 

 

Hub Dimensions Decision Tree:

 

If Any Diameter Hub does not reach a line across the outer edge of the wheel, P GQST60 Will Fit.
 
If Hubs up to 4-7/8" diameter protrudes LESS THAN 7/8" past a line across the outer edge of the wheel, P GQST60 Will Fit.

 

If Hubs larger than 4-1/4" diameter protrudes MORE THAN 7/8" past a line across the outer edge of the wheel, P GQST60 Will NOT Fit.

 

If hubs are 4-1/4" OR SMALLER diameter and protrude LESS THAN 1-1/2"  past a line across the edge of the steel wheel, P GQST60 Will Fit.

 

If ANY Hubs protrude MORE THAN 1-1/2" past a line across the edge of the steel wheel, P GQST60 Will NOT Fit.


 

HOW TO Measure Hub Protrusion past a straight line across the lip of the Steel Truck or Trailer Wheel,

Use a straight edge or a piece of string.

 

This hub just reaches the line and the grease nipple goes past it 1/4".

 

 

2006 E350 Steel Wheel, Ford Truck or van2006 E350 Steel Wheel, Ford Truck or van

If you have a Ford Truck or Van with one of the 16" steel wheels pictured at left,        These are styled steel wheels.

We regret to tell you we have nothing to fit these wheels.

Standard hubcaps will not fit this wheel because the section with the oval holes bulges outward and does not allow the hubcap to mount.

The only thing we know will fit them  is the OEM Ford Hubcaps that come on them.

You will have to buy them from Ford, or perhaps find some used ones on Ebay.
Further,  there is no Wheelskin that has been designed to fit this wheel.

 

Hi Team, Thank you. I have received the goods (GQ64 Phoenix Push-on Simulators) and every thing is in order. Items have been fitted and the truck looks again a million. Thank you again for such prompt service. Kind regards Walter S, Wondunna, Queensland Australia

Phil, I received the (Phoenix) wheel simulators today & installed them. Phoenix makes a nice product. Thank you again. Michael C, Hicksville NY

Hi Phil: The Phoenix simulators arrive yesterday, they fit perfect and look super. Thanks Wayne L, Alamogordo NM

Thank you for getting to this order (Phoenix Dual Wheel Simulators, special order) out so quickly. I will continue to use your company for any future needs because of your great customer service. Jeanne P Klamath Falls OR

Received everything in perfect condition. They (N816UL 16 inch Bolt-On Stainless Dually Simulators) really look nice on the motorhome. Thanks a lot for the good service and the awesome price!! Gary D

Email your pictures and we will post yours on the website too!!

We stock a number of Stainless Steel Single Simulator Hubcaps for trucks and RVs in other wheel sizes, lug numbers, and bolt-on configurations.  There are too many details for internet ordering. If this is what you need, call us.  We will need the make, model, year, number of lug nuts, chassis type, and the Hollander number found on the steel wheel itself.  We can give you a quote on what you need.

Why are these called "Simulators"? These hubcaps simulate chrome plated Single wheels, but are MUCH more affordable.