|> Single Wheel Simulators > Trailer Sims > P GQST50 Stainless 15 inch Single Wheel Simulators|
P GQST50 Stainless Steel Push-on Single Wheel 'Simulator' Hubcaps
Fit 15 inch Truck or Trailer Standard Steel Wheels
Front view Angled view, and Back side view shows 360 mounting tabs.
P-GQST50 Stainless Steel Single Wheel Simulator / Liner Hubcaps, Push-on Installation
**Please read this entire page before you make a purchase**
Phoenix Logos CLPH2 are sold separately
Fits 15" - 5 or 6-lug Standard Steel Truck or Trailer** Wheels
Fits Chevy, GMC, Dodge or Ford 2wd or 4wd, Single-Wheel Trucks,
Fits most Trailer Wheels with Bearing buddies
**If your Hub extends past a line across the outer edge of the wheel--Read the decision tree below.**
All center covers (PGQ60POC) are removable for trailer or 4x4 manual hubs
Prices include Free Shipping to the 48 contiguous states.
For shipping outside the 48 states, please email.
[[If you have styled wheels, these will not work, you should look at our Wheelskins section]]
|** Fits car/truck wheels that look like these:
||Fits most "White Spoke" (left) or
"Mod" (right) wheels that look like these:
Wheels must have "Safety Hump" marked with the red dot
Read more on Safety Hump page, or call with your questions.
It is pretty rare for a hub to be too large to fit inside the P GQST50, but it does occur occasionally.
This picture attempts to show you the diameter and protrusion clearance available for Heavy-Duty Axle Hubs.
Hub Dimensions Decision Tree:
If Any Diameter Hub does not reach a line across the outer edge of the wheel, P GQST50 Will Fit.
If Hubs up to 4-7/8" diameter protrudes LESS THAN 3/4" past a line across the outer edge of the wheel, P GQST50 Will Fit.
If hubs are 4-1/4" OR SMALLER diameter and protrude LESS THAN 1-3/8" past a line across the edge of the steel wheel, GQST60 Will Fit.
If Hubs larger than 4-1/4" diameter protrudes MORE THAN 3/4" past a line across the outer edge of the wheel, P GQST50 Will NOT Fit.
If ANY Hubs protrude MORE THAN 1-3/8" past a line across the edge of the steel wheel, P GQST50 Will NOT Fit.
Unless you remove or cut a hole in the the Pop-Out-Center
HOW TO Measure Hub Protrusion past a straight line across the lip of the Steel Truck or Trailer Wheel,
Use a straight edge or a piece of string.
This hub just reaches the line and the grease nipple goes past it 1/4".
|These Universal Fit Stainless Steel Single Wheel hubcaps are ready for a fast
and easy, push-on installation for all makes of Standard Steel Wheels. They are made of high quality,
polished T304L stainless for long corrosion-free life.
|Hi Team, Thank you. I have received the goods (GQ64 Phoenix
Push-on Simulators) and every thing is in order. Items have been fitted and the truck looks again a million. Thank you again for such prompt service. Kind regards Walter S, Wondunna, Queensland Australia
Phil, I received the (Phoenix) wheel simulators today & installed them. Phoenix makes a nice product. Thank you again. Michael C, Hicksville NY
Hi Phil: The Phoenix simulators arrive yesterday, they fit perfect and look super. Thanks Wayne L, Alamogordo NM
Thank you for getting to this order (Phoenix Dual Wheel Simulators, special order) out so quickly. I will continue to use your company for any future needs because of your great customer service. Jeanne P Klamath Falls OR
Received everything in perfect condition. They (N816UL 16 inch Bolt-On Stainless Dually Simulators) really look nice on the motorhome. Thanks a lot for the good service and the awesome price!! Gary D
Email your pictures and we will post yours on the website too!!
Why are these called "Simulators"? These hubcaps simulate chrome plated Single wheels, but are MUCH more affordable.