AutoAmenity Chrome Wheelskins Hubcaps Home >Dually Simulators > Valve Stem Extension Kits >Single Wheel Sims >Trailer Simulators >Pressure Equalizing Kits

Phoenix Dual Wheel Valve Stem Extension Hose Kits

Phoenix Valve Extension Hose Kits for Polished Stainless Dual Wheel Simulator Liners Rugged Braided Stainless Steel "Live Stem" hoses are rated for 120 psi working pressure
Quick and easy installation. Stand-out hoses make checking and filling air easier.

Call 888-526-0273 Toll-Free with questions or to order (8am to 5pm Florida Time)

Prices for valve extension kits with Buy Now Buttons include Free shipping

Air Max Four-Hose Valve Stem Extension Kits with Heavy Duty Stainless Brackets 3.5" Tall

Air Max Four-Hose Kits with 3.5" brackets

Phoenix AirMax Dual Dually Dualy Dualies wheel tire Valve Extension hose and bracket


Prices for valve extension kits include Free shipping*
to the 48 States

 

Valve Extension brackets are 3.5" tall,

stamped of 16 gauge (.060) stainless

 

Install Extension Hoses to Valve Stems Finger tight plus 1/2 turn, no more

Installation Instructions at bottom of this page

 

These Air Max Kits Must Bolt Under steel lug nuts or jam nuts. They are not designed to work with (Chevy) plastic jam nuts or Push-on Hub covers or Push-on Wheel covers.
AirMax Kit - Diagram shows how the AirMax Dual wheel tire Valve Extension hose and brackets mount

Phoenix Hoses are rated for 120 psi working pressure

[Air-Max Kits do not work with push-on simulators unless you clip off the bracket bottom, drill two holes, then

screw or pop-rivet them to the hub of your simulators.]

AirMax Dual wheel tire  Valve Extension Small Hole Bracket with hose, nut and cap

 

The P-AMS1 Kit with the Small bottom hole brackets Has been Discontinued, None Remain.

P-AML1 Kit $69.95

 Kit includes 2 - 9" hoses with 45 degree angle
and 2 - 13" straight hoses, with 4 brackets
for most light-duty dual wheels up to 19.5"
Chevy-GM 3500, up to 2009, See AML2 for 10+up
Chevy Kodiak & GM Topkick 19.5" Needs the AMG1 Kit
Fits Dodge 3500-5500 16", 17" & 19"
Fits Ford E&F350-450-550 16" & 17" (19.5" see AML2)
P-AML1 Bracket bottom holes are 7/8" (23mm) diameter
for smaller stud extenders, also work with bolt-on wheel simulators without stud extenders or on 'naked wheels" with flat-bottom nuts.
Phoenix DOTLiner Wheel Simulators Details Page

The P-AML1 and P-AMH1 kits are the same except for the size of the holes in the brackets.

Use P-AMM1 Kit below for the 6-Lug Import wheels
that have larger Stud Extenders
Simulators N6640, N6664, N6670, N6680, N6695

P-AML2 Kit $72.95

 Kit includes 2 - 10" hoses with 63 degree angle
and 2 - 16" straight hoses, with 4 brackets
Fits Chevy-GM 3500 2010+up, For earlier years use AML-1
Chevy Kodiak & GM Topkick 19.5" Needs the AMG1 Kit
Fits Ford F450-550, F53  19.5" LD
Fits these 17" Sims: NF23 NG17 NG18
Fits 19.5 Sims: NF19 NF22 NF25 ND1907 NG961
P-AML2 Bracket bottom holes are 7/8" (23mm) diameter

P-AMM1 Kit $72.95 

Use P-AMM1 Kit for the 6-Lug Import wheels

that have larger Stud Extenders
Fits Simulators N6640, N6664, N6670, N6680. N6695

P-AMH1 Kit $69.95 

 Kit includes 2 - 9" hoses with 45 degree angle
and 2 - 13" straight hoses, with 4 brackets
for most HD dual wheels 19.5" to 24.5."
19.5" includes Chevy 4500 and up, Ford F650 and up.
P-AMH1 Bracket bottom holes are 1-3/8" (35mm) diameter.
for larger stud extenders on Heavy-Duty Wheels,
also work with bolt-on wheel simulators without stud extenders or on 'naked wheels" with flat bottom nuts. Not recommended for Alcoa wheels because the holes are smaller, though they may work, at your risk.

P-AMG1 Kit $69.95  

Kit is the same as the AMH1 above, but with the addition of (HE301) 30 degree bent, swiveling valve stem adaptors that allow fitting for
03+up Chevy-GMC C4500-6500 Kodiak & Topkick w/ 19.5" 8 lug wheels
Also for some import wheels with odd valve stem angles.
Phoenix Extension Kit Parts available separately, Plus Shipping:
Swiveling Valve Stem Adaptor                      #HE301     $6.00
*Extension Hoses come with Lock Nut and Cap*
5.75 inch straight extension hose             #VE534LS-1 $19.00
8 inch straight extension hose                  #VE734LS-1 $19.00
9 inch extension hose with 45 angle bend    #VE990SS $19.00
10 inch extension hose with 63 angle bend   #VE963SS $19.00
13 inch straight extension hose              #VE1300SS    $21.00
15 inch extension hose with 45 angle bend  #VE1500SS $22.00
24 inch straight extension hose               #VE2400SS    $24.00
Extension Bracket w/ 7/8" 23mm bottom hole   #VBK-L   $7.00
Extension Bracket w/ 1-3/8" 35mm bottom hole #VBK-H $9.00
Extension Bracket         for the AMM1 Set          #VBK-M $9.00
Wire Brackets              STA3-1 and STA4-1, per each     $5.00
Nut to Lock Hose to Valve Extender Bracket PVE990NUT  $2.00

RWC Valve Extension Kits for use with RWC Simulators

RW1258-xx 2 hose Kit for Single Rear Simulator $79.95
RW1258-xx 4 hose Kit for Rear Axle Simulators $149.95 
Click for Installation Diagrams        Call to Order
Pictures and diagram below show AirMAX kit installed.
AirMAX Brackets mount under simulator lugs and stand out for easy access
AirMax Dual Dually Dualy Dualies wheel tire Valve Extension hose and bracket Kit installed with brackets under lugs


Phoenix Valve Extension Hose Kits for Polished Stainless Dual Wheel Simulator Liners
Hand is holding AirMax Dual wheel tire  Valve Extension hose and brackets
AirMax Dual Valve Extension Kit installed with brackets under lugs

AirPlus (AP) Kits  Two-Hose Dual wheel Valve Stem Extension and Stabilizer Kits, can be used with any wheel simulators or on 'naked' dual wheels.

AP3 AirPlus Dual wheel tire bent neck Valve Extensions Kit

P-AP3 Kit $29.95 

Set of 2 - 45 degree bent valve extenders
For outer wheels, see diagram below
Tough Stainless Steel for durability.
Work best when installed on steel valve stems, rubber stems bend

Phoenix Valve extensions are rated for 120 psi working pressure


Phoenix Valve Extension Hose Kits for Polished Stainless Dual Wheel Simulator Liners
Diagram shows AirPlus Kits mounting
AirPlus Kit - Diagram shows how the Valve Extenders hose and brackets mount to Dually Dualy Dualies wheels
AirPlus Dual hose tire Valve Extension Hose and spring bracket Kit, hoses have nut for bracket mount

Hoses have nut on the male end for bracket mount

Phoenix P-AP4-6 Kits for Inner Wheels

Kits include pair of extension hoses with Stainless Spring Stabilizer Wires, Makes Checking and filling air much easier
Rugged Braided Stainless Steel "Live Stem" hoses.
Wire stabilizers prevent movement. Quick and easy installation
Works with any brand of wheel Simulators or naked wheels.

P-AP4 Kit $44.95

Kit includes 2--5.75" long hose and STA3  4" wire brackets
fits all Chevy C3500-4500-5500 and 08+up Ford E350-E450
light duty 16" 8 lug wheels with oval hand holes

P-AP5 Kit $44.95

Kit includes 2--5.75" long hose and STA4  2" wire brackets
fits 92-07 Ford E350-E450
w/ round hand holes

P-AP6 Kit $47.95

Kit includes 2--8" long hose and STA3 4" wire brackets
fits 99+up Ford F450 and F550
19.5" wheels

Phoenix Extension Hose Stabilizer Wire Brackets are
Intended for Steel Dual Wheels,
They Do Not Work on Aluminum Wheels which are Thicker

AirMax Dual wheel tire  Valve Extension hose and bracket Stabilizer Wires

If you have questions about Dually Simulators, the information we need to determine the right model to fit your vehicle is:  make, model, year of chassis, number of lug nuts, standard or metric lugs, number of hand holes, and the Accuride number found on the steel wheel itself.

 

We have had virtually no customer complaints or problems related to failure or leakage of Phoenix Valve Stem Extension sets. They are rated for 120 psi working pressure.

 

Tire Valves use International Standard threads. The standard Schrader Tire valve has the following thread: 7.7 mm OD, 32 tpi, or 0.794 mm pitch, Minor diameter is 6.9mm, Thread designation is .305-32 or 7.7-32

 

We have had customers with leakage problems that turned out to be related to inadequate valve stems. Quality Valve Stems are much more critical with high-pressure truck tires than auto tires.  

 

Air Max Extender Kit Installation Instructions:

1. Remove factory installed plastic air valve and quick fill caps from valve stems.
2. If installed, remove wheel liners.
3. Inspect inner and out wheel valve stems and ensure they are at opposing points. If they are not opposite, safely remove outer wheel and rotate until valve stems are at opposite points and visible through hand hole, reinstall factory lugnuts and torque to manufacturers specifications.
4. Wheels should be clean of dirt, debris, and grease
5. Install the inner valve stem extender and hand tighten.
6. Install the outer valve stem extender and hand tighten.
7. Pull hoses through the hand hole of liner.
8. Remove top hex nut.
9. Install the service end of valve stem extenders through the small hole of the bracket.
10. Secure valve stem extenders to bracket with included hex nut.
11. Install brackets with back side of bracket closest to hub (touching the hubcover of the liner is normal)
12. Install jamnuts on DOT liners or Install the lug nuts onto the wheel if no liner and tighten to manufacturer specifications. Keeping brackets under the lug nuts or jamnuts.
13. Repeat for opposite side of vehicle.
14. Note:  Dual wheel air valve angles and placement vary widely. Sometimes the valve extension hoses seem too long coming straight out of the hole in the wheel to the nearest lug nut holding the bracket. In this situation we recommend rotating the simulator one way or the other, so the brackets are held on the next stud further away, so that the slack is taken up by the greater diagonal distance out of the hole to the bracket.